changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL360e Gen8/DL380e Gen8 (P73) Servers HP ProLiant DL360e Gen8/DL380e Gen8 (P73) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Smart Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Smart Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Smart Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036447.zip CP036447.zip file://./packages/CP036447.zip CP036447.vmexe CP036447.vmfile CP036447.xml README.txt changed Online ROM Flash Component for Linux - HP ProLiant DL160 Gen8 (J03) Servers HP ProLiant DL160 Gen8 (J03) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-j03-2018.05.21-1.1.i386.rpm firmware-system-j03-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-j03-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-j03-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-j03-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-j03-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-j03-2018.05.21-1.1/CP036424.xml ./usr/lib/i386-linux-gnu/firmware-system-j03-2018.05.21-1.1/CPQJ0313.4B5 ./usr/lib/i386-linux-gnu/firmware-system-j03-2018.05.21-1.1/cpqsfj03.cfg ./usr/lib/i386-linux-gnu/firmware-system-j03-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036424.scexe changed Online ROM Flash Component for Windows - HP ProLiant XL220a Gen8 v2 (P94) Servers HP ProLiant XL220a Gen8 v2 (P94) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

1.     Place the Smart Component in a temporary directory.
2.     From the same directory, run the Smart Component by double-clicking it.
3.     When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
4.     Reboot your system if you would like the update to take effect immediately.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036474.exe cp036474.exe file://./packages/cp036474.exe CPQP9413.4B5 SignedImageInstaller.dll cp036474.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for Windows - HP ProLiant SL4540 Gen8 (P74) Servers HP ProLiant SL4540 Gen8 (P74) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 x64 - Server Edition Microsoft Windows Server 2008 x64 - Server Core Edition Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036493.exe cp036493.exe file://./packages/cp036493.exe CPQP7413.4B5 SignedImageInstaller.dll cp036493.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for Linux - HP ProLiant BL465c Gen8 (A26) Servers HP ProLiant BL465c Gen8 (A26) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HPE ProLiant Agentless Management Service (AMS) and HPE SNMP Agents (SNMP Agents) are both running. HPE does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-a26-2018.03.14-1.1.i386.rpm firmware-system-a26-2018.03.14-1.1.i386.rpm file://./packages/firmware-system-a26-2018.03.14-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-a26-2018.03.14-1.1 ./usr/lib/i386-linux-gnu/firmware-system-a26-2018.03.14-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-a26-2018.03.14-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-a26-2018.03.14-1.1/CP035495.xml ./usr/lib/i386-linux-gnu/firmware-system-a26-2018.03.14-1.1/CPQA2613.46E ./usr/lib/i386-linux-gnu/firmware-system-a26-2018.03.14-1.1/cpqsfa26.cfg ./usr/lib/i386-linux-gnu/firmware-system-a26-2018.03.14-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP035495.scexe changed Online ROM Flash Component for VMware ESXi - HP ProLiant XL220a Gen8 v2 (P94) Servers HP ProLiant XL220a Gen8 v2 (P94) Servers Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) This component requires that the following HPE drivers be loaded before the component can run.
1. The "HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) must be installed and running.
The minimum iLO version for ESXi 5.1, ESXi 5.5, ESXi 6.0 and ESXi 6.5 is 1.4.
2. The “Compaq ROM Utility Driver” (CRU) must be installed and running
The minimum CRU version for 5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.

Both drivers are integrated into the HPE VMware Custom Image which also contains other HPE advanced management tools. The drivers are also available from the OS specific “HPE Agentless Management Service Offline Bundle” for VMware vSphere 6.5, 6.0, 5.5, and 5.1 on vibsdepot.hpe.com.

]]> IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the Post-Production SPP from www.hpe.com/servers/SPP/download
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Smart Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Smart Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Smart Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036477.zip CP036477.zip file://./packages/CP036477.zip CP036477.vmexe CP036477.vmfile CP036477.xml README.txt changed Online ROM Flash Component for VMware ESXi - HP ProLiant ML310e Gen8 (J04) Servers HP ProLiant ML310e Gen8 (J04) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Smart Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Smart Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Smart Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036587.zip CP036587.zip file://./packages/CP036587.zip CP036587.vmexe CP036587.vmfile CP036587.xml README.txt changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL360p Gen8/DL360p Gen8 SE (P71) Servers HP ProLiant DL360p Gen8/DL360p Gen8 SE (P71) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Components are used, not the VMware Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the Post-Production SPP from www.hpe.com/servers/SPP/download
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036429.zip CP036429.zip file://./packages/CP036429.zip CP036429.vmexe CP036429.vmfile CP036429.xml README.txt changed Online ROM Flash Component for Linux - HP ProLiant ML350p Gen8 (P72) Servers HP ProLiant ML350p Gen8 (P72) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-p72-2018.05.21-1.1.i386.rpm firmware-system-p72-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-p72-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-p72-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-p72-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-p72-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-p72-2018.05.21-1.1/CP036432.xml ./usr/lib/i386-linux-gnu/firmware-system-p72-2018.05.21-1.1/CPQP7213.4B5 ./usr/lib/i386-linux-gnu/firmware-system-p72-2018.05.21-1.1/cpqsfp72.cfg ./usr/lib/i386-linux-gnu/firmware-system-p72-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036432.scexe changed Online ROM Flash Component for VMware ESXi - HP ProLiant MicroServer Gen8 (J06) Servers HP ProLiant MicroServer Gen8 (J06) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Components are used, not the VMware Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the Post-Production SPP from www.hpe.com/servers/SPP/download
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036421.zip CP036421.zip file://./packages/CP036421.zip CP036421.vmexe CP036421.vmfile CP036421.xml README.txt changed Online ROM Flash Component for Windows - HP ProLiant DL360p Gen8/DL360p Gen8 SE (P71) Servers HP ProLiant DL360p Gen8/DL360p Gen8 SE (P71) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

1.     Place the Component in a temporary directory.
2.     From the same directory, run the Component by double-clicking it.
3.     When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4.     Reboot your system if you would like the update to take effect immediately.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036426.exe cp036426.exe file://./packages/cp036426.exe CPQP7113.4B5 SignedImageInstaller.dll cp036426.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL320e Gen8 v2 (P80) Servers HP ProLiant DL320e Gen8 v2 (P80) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the Post-Production SPP from www.hpe.com/servers/SPP/download
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Smart Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Smart Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Smart Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect
ja

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036506.zip CP036506.zip file://./packages/CP036506.zip CP036506.vmexe CP036506.vmfile CP036506.xml README.txt changed Online ROM Flash Component for Windows - HP ProLiant DL320e Gen8 v2 (P80) Servers HP ProLiant DL320e Gen8 v2 (P80) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036502.exe cp036502.exe file://./packages/cp036502.exe CPQP8013.4B5 SignedImageInstaller.dll cp036502.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL560 Gen8 (P77) Servers HP ProLiant DL560 Gen8 (P77) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Components are used, not the VMware Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the Post-Production SPP from www.hpe.com/servers/SPP/download
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036520.zip CP036520.zip file://./packages/CP036520.zip CP036520.vmexe CP036520.vmfile CP036520.xml README.txt changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL385p Gen8 (A28) Servers HP ProLiant DL385p Gen8 (A28) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Components are used, not the VMware Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the Post-Production SPP from www.hpe.com/servers/SPP/download
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP035457.zip CP035457.zip file://./packages/CP035457.zip CP035457.vmexe CP035457.vmfile CP035457.xml README.txt changed Online ROM Flash Component for Linux - HP ProLiant ML350e Gen8/ML350e Gen8 v2 (J02) Servers HP ProLiant ML350e Gen8/ML350e Gen8 v2 (J02) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-j02-2018.05.21-1.1.i386.rpm firmware-system-j02-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-j02-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-j02-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-j02-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-j02-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-j02-2018.05.21-1.1/CP036511.xml ./usr/lib/i386-linux-gnu/firmware-system-j02-2018.05.21-1.1/CPQJ0213.4B5 ./usr/lib/i386-linux-gnu/firmware-system-j02-2018.05.21-1.1/cpqsfj02.cfg ./usr/lib/i386-linux-gnu/firmware-system-j02-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036511.scexe changed Online ROM Flash Component for Windows - HP ProLiant DL560 Gen8 (P77) Servers HP ProLiant DL560 Gen8 (P77) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036517.exe cp036517.exe file://./packages/cp036517.exe CPQP7713.4B5 SignedImageInstaller.dll cp036517.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for Windows - HP ProLiant SL210t Gen8 (P83) Servers HP ProLiant SL210t Gen8 (P83) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036482.exe cp036482.exe file://./packages/cp036482.exe CPQP8313.4B5 SignedImageInstaller.dll cp036482.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for Linux - HP ProLiant SL210t Gen8 (P83) Servers HP ProLiant SL210t Gen8 (P83) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> ]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-p83-2018.05.21-1.1.i386.rpm firmware-system-p83-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-p83-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-p83-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-p83-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-p83-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-p83-2018.05.21-1.1/CP036484.xml ./usr/lib/i386-linux-gnu/firmware-system-p83-2018.05.21-1.1/CPQP8313.4B5 ./usr/lib/i386-linux-gnu/firmware-system-p83-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036484.scexe changed Online ROM Flash Component for VMware ESXi - HP ProLiant ML350p Gen8 (P72) Servers HP ProLiant ML350p Gen8 (P72) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Components are used, not the VMware Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036436.zip CP036436.zip file://./packages/CP036436.zip CP036436.vmexe CP036436.vmfile CP036436.xml README.txt changed Online ROM Flash Component for VMware ESXi - HP ProLiant ML350e Gen8/ML350e Gen8 v2 (J02) Servers HP ProLiant ML350e Gen8/ML350e Gen8 v2 (J02) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Smart Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Smart Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Smart Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036512.zip CP036512.zip file://./packages/CP036512.zip CP036512.vmexe CP036512.vmfile CP036512.xml README.txt changed Online ROM Flash Component for Windows - HP ProLiant ML350e Gen8/ML350e Gen8 v2 (J02) Servers HP ProLiant ML350e Gen8/ML350e Gen8 v2 (J02) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036509.exe cp036509.exe file://./packages/cp036509.exe CPQJ0213.4B5 SignedImageInstaller.dll cp036509.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for Linux - HP ProLiant DL360p Gen8/DL360p Gen8 SE (P71) Servers HP ProLiant DL360p Gen8/DL360p Gen8 SE (P71) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-p71-2018.05.21-1.1.i386.rpm firmware-system-p71-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-p71-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-p71-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-p71-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-p71-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-p71-2018.05.21-1.1/CP036428.xml ./usr/lib/i386-linux-gnu/firmware-system-p71-2018.05.21-1.1/CPQP7113.4B5 ./usr/lib/i386-linux-gnu/firmware-system-p71-2018.05.21-1.1/cpqsfp71.cfg ./usr/lib/i386-linux-gnu/firmware-system-p71-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036428.scexe changed Online ROM Flash Component for Windows - HP ProLiant DL580 Gen8 (P79) Servers Online ROM Flash Component for Windows - HP ProLiant DL580 Gen8 (P79) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2016 Server BIOS - System ROM English (US) The "HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) for Windows which is available from Service Pack for ProLiant (SPP).

]]> To update firmware from Windows operating system on target server:

1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036499.exe cp036499.exe file://./packages/cp036499.exe P79_2.20_05_21_2018.signed.flash SignedImageInstaller.dll cp036499.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for VMware ESXi - HP ProLiant ML310e Gen8 v2 (P78) Servers HP ProLiant ML310e Gen8 v2 (P78) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.

The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 5.1 is 5.0.3.9.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the Post-Production SPP from www.hpe.com/servers/SPP/download
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Smart Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Smart Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Smart Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036492.zip CP036492.zip file://./packages/CP036492.zip CP036492.vmexe CP036492.vmfile CP036492.xml README.txt changed Online ROM Flash Component for Windows - HP ProLiant ML350p Gen8 (P72) Servers HP ProLiant ML350p Gen8 (P72) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036430.exe cp036430.exe file://./packages/cp036430.exe CPQP7213.4B5 SignedImageInstaller.dll cp036430.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for Linux - HP ProLiant XL220a Gen8 v2 (P94) Servers HP ProLiant XL220a Gen8 v2 (P94) Servers Hewlett Packard Enterprise Red Hat Enterprise Linux 7 Server Red Hat Enterprise Linux 6 Server (x86-64) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-p94-2018.05.21-1.1.i386.rpm firmware-system-p94-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-p94-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-p94-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-p94-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-p94-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-p94-2018.05.21-1.1/CP036476.xml ./usr/lib/i386-linux-gnu/firmware-system-p94-2018.05.21-1.1/CPQP9413.4B5 ./usr/lib/i386-linux-gnu/firmware-system-p94-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036476.scexe changed Online ROM Flash Component for VMware ESXi - HP ProLiant ML10 v2 (J10) Servers HP ProLiant ML10 v2 (J10) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.

The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 5.1 is 5.0.3.9.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the Post-Production SPP from www.hpe.com/servers/SPP/download
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Smart Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Smart Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Smart Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036439.zip CP036439.zip file://./packages/CP036439.zip CP036439.vmexe CP036439.vmfile CP036439.xml README.txt changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL380p Gen8 (P70) Servers HP ProLiant DL380p Gen8 (P70) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Components are used, not the VMware Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036410.zip CP036410.zip file://./packages/CP036410.zip CP036410.vmexe CP036410.vmfile CP036410.xml README.txt changed Online ROM Flash Component for VMware ESXi - HP ProLiant BL460c/WS460c Gen8 (I31) Servers HP ProLiant BL460c/WS460c Gen8 (I31) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Components are used, not the VMware Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the Post-Production SPP from www.hpe.com/servers/SPP/download
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036466.zip CP036466.zip file://./packages/CP036466.zip CP036466.vmexe CP036466.vmfile CP036466.xml README.txt changed Online ROM Flash Component for Linux - HP ProLiant ML310e Gen8 (J04) Servers HP ProLiant ML310e Gen8 (J04) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-j04-2018.05.21-1.1.i386.rpm firmware-system-j04-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-j04-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-j04-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-j04-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-j04-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-j04-2018.05.21-1.1/CP036586.xml ./usr/lib/i386-linux-gnu/firmware-system-j04-2018.05.21-1.1/CPQJ0413.4B5 ./usr/lib/i386-linux-gnu/firmware-system-j04-2018.05.21-1.1/cpqsfj04.cfg ./usr/lib/i386-linux-gnu/firmware-system-j04-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036586.scexe changed Online ROM Flash Component for Windows - HP ProLiant ML310e Gen8 (J04) Servers HP ProLiant ML310e Gen8 (J04) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2012 R2 Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036584.exe cp036584.exe file://./packages/cp036584.exe CPQJ0413.4B5 SignedImageInstaller.dll cp036584.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for Windows - HP ProLiant DL320e Gen8 (J05) Servers HP ProLiant DL320e Gen8 (J05) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036525.exe cp036525.exe file://./packages/cp036525.exe CPQJ0513.4B5 SignedImageInstaller.dll cp036525.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for Windows - HP ProLiant ML310e Gen8 v2 (P78) Servers HP ProLiant ML310e Gen8 v2 (P78) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036489.exe cp036489.exe file://./packages/cp036489.exe CPQP7813.4B5 SignedImageInstaller.dll cp036489.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL320e Gen8 (J05) Servers HP ProLiant DL320e Gen8 (J05) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Smart Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Smart Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Smart Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036528.zip CP036528.zip file://./packages/CP036528.zip CP036528.vmexe CP036528.vmfile CP036528.xml README.txt changed Online ROM Flash Component for Windows - HP ProLiant BL465c Gen8 (A26) Servers HP ProLiant BL465c Gen8 (A26) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp035493.exe cp035493.exe file://./packages/cp035493.exe CPQA2613.46E SignedImageInstaller.dll cp035493.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for Windows - HP ProLiant DL160 Gen8 (J03) Servers HP ProLiant DL160 Gen8 (J03) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036422.exe cp036422.exe file://./packages/cp036422.exe CPQJ0313.4B5 SignedImageInstaller.dll cp036422.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for Linux - HP ProLiant DL380p Gen8 (P70) Servers HP ProLiant DL380p Gen8 (P70) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-p70-2018.05.21-1.1.i386.rpm firmware-system-p70-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-p70-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-p70-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-p70-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-p70-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-p70-2018.05.21-1.1/CP036409.xml ./usr/lib/i386-linux-gnu/firmware-system-p70-2018.05.21-1.1/CPQP7013.4B5 ./usr/lib/i386-linux-gnu/firmware-system-p70-2018.05.21-1.1/cpqsfp70.cfg ./usr/lib/i386-linux-gnu/firmware-system-p70-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036409.scexe changed Online ROM Flash Component for Linux - HP ProLiant BL420c Gen8 (I30) Servers HP ProLiant BL420c Gen8 (I30) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-i30-2018.05.21-1.1.i386.rpm firmware-system-i30-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-i30-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-i30-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-i30-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-i30-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-i30-2018.05.21-1.1/CP036557.xml ./usr/lib/i386-linux-gnu/firmware-system-i30-2018.05.21-1.1/CPQI3013.4B5 ./usr/lib/i386-linux-gnu/firmware-system-i30-2018.05.21-1.1/cpqsfi30.cfg ./usr/lib/i386-linux-gnu/firmware-system-i30-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036557.scexe changed Online ROM Flash Component for Windows - HP ProLiant BL420c Gen8 (I30) Servers HP ProLiant BL420c Gen8 (I30) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036555.exe cp036555.exe file://./packages/cp036555.exe CPQI3013.4B5 SignedImageInstaller.dll cp036555.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for Linux - HP ProLiant SL4540 Gen8 (P74) Servers HP ProLiant SL4540 Gen8 (P74) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-p74-2018.05.21-1.1.i386.rpm firmware-system-p74-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-p74-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-p74-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-p74-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-p74-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-p74-2018.05.21-1.1/CP036495.xml ./usr/lib/i386-linux-gnu/firmware-system-p74-2018.05.21-1.1/CPQP7413.4B5 ./usr/lib/i386-linux-gnu/firmware-system-p74-2018.05.21-1.1/cpqsfp74.cfg ./usr/lib/i386-linux-gnu/firmware-system-p74-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036495.scexe changed Online ROM Flash Component for Windows - HP ProLiant DL360e Gen8/DL380e Gen8 (P73) Servers HP ProLiant DL360e Gen8/DL380e Gen8 (P73) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036444.exe cp036444.exe file://./packages/cp036444.exe CPQP7313.4B5 SignedImageInstaller.dll cp036444.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for VMware ESXi - HP ProLiant SL230s/SL250s/SL270s Gen8/SL270s Gen8 SE (P75) Servers HP ProLiant SL230s/SL250s/SL270s Gen8/SL270s Gen8 SE (P75) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Components are used, not the VMware Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the Post-Production SPP from www.hpe.com/servers/SPP/download
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036516.zip CP036516.zip file://./packages/CP036516.zip CP036516.vmexe CP036516.vmfile CP036516.xml README.txt changed Online ROM Flash Component for Linux - HP ProLiant DL320e Gen8 (J05) Servers HP ProLiant DL320e Gen8 (J05) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-j05-2018.05.21-1.1.i386.rpm firmware-system-j05-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-j05-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-j05-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-j05-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-j05-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-j05-2018.05.21-1.1/CP036527.xml ./usr/lib/i386-linux-gnu/firmware-system-j05-2018.05.21-1.1/CPQJ0513.4B5 ./usr/lib/i386-linux-gnu/firmware-system-j05-2018.05.21-1.1/cpqsfj05.cfg ./usr/lib/i386-linux-gnu/firmware-system-j05-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036527.scexe changed Online ROM Flash Component for Linux - HP ProLiant SL230s/SL250s/SL270s Gen8/SL270s Gen8 SE (P75) Servers HP ProLiant SL230s/SL250s/SL270s Gen8/SL270s Gen8 SE (P75) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) SUSE Linux Enterprise Server 12 Red Hat Enterprise Linux 7 Server Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> ]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-p75-2018.05.21-1.1.i386.rpm firmware-system-p75-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-p75-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-p75-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-p75-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-p75-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-p75-2018.05.21-1.1/CP036515.xml ./usr/lib/i386-linux-gnu/firmware-system-p75-2018.05.21-1.1/CPQP7513.4B5 ./usr/lib/i386-linux-gnu/firmware-system-p75-2018.05.21-1.1/cpqsfp75.cfg ./usr/lib/i386-linux-gnu/firmware-system-p75-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036515.scexe changed Online ROM Flash Component for Windows - HP ProLiant SL230s/SL250s/SL270s Gen8/SL270s Gen8 SE (P75) Servers HP ProLiant SL230s/SL250s/SL270s Gen8/SL270s Gen8 SE (P75) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 x64 - Server Edition Microsoft Windows Server 2008 x64 - Server Core Edition Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036513.exe cp036513.exe file://./packages/cp036513.exe CPQP7513.4B5 SignedImageInstaller.dll cp036513.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for Windows - HP ProLiant BL660c Gen8 (I32) Servers HP ProLiant BL660c Gen8 Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036467.exe cp036467.exe file://./packages/cp036467.exe CPQI3213.4B5 SignedImageInstaller.dll cp036467.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for Linux - HP ProLiant BL460c/WS460c Gen8 (I31) Servers HP ProLiant BL460c/WS460c Gen8 (I31) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> ]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-i31-2018.05.21-1.1.i386.rpm firmware-system-i31-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-i31-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-i31-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-i31-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-i31-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-i31-2018.05.21-1.1/CP036465.xml ./usr/lib/i386-linux-gnu/firmware-system-i31-2018.05.21-1.1/CPQI3113.4B5 ./usr/lib/i386-linux-gnu/firmware-system-i31-2018.05.21-1.1/cpqsfi31.cfg ./usr/lib/i386-linux-gnu/firmware-system-i31-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036465.scexe changed Online ROM Flash Component for Linux - HP ProLiant DL320e Gen8 v2 (P80) Servers HP ProLiant DL320e Gen8 v2 (P80) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-p80-2018.05.21-1.1.i386.rpm firmware-system-p80-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-p80-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-p80-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-p80-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-p80-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-p80-2018.05.21-1.1/CP036505.xml ./usr/lib/i386-linux-gnu/firmware-system-p80-2018.05.21-1.1/CPQP8013.4B5 ./usr/lib/i386-linux-gnu/firmware-system-p80-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036505.scexe changed Online ROM Flash Component for Windows - HP ProLiant MicroServer Gen8 (J06) Servers HP ProLiant MicroServer Gen8 (J06) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows Server 2008 Foundation Edition Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036418.exe cp036418.exe file://./packages/cp036418.exe CPQJ0613.4B5 SignedImageInstaller.dll cp036418.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for VMware ESXi - HP ProLiant BL660c Gen8 (I32) Servers HP ProLiant BL660c Gen8 (I32) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Components are used, not the VMware Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the Post-Production SPP from www.hpe.com/servers/SPP/download
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036470.zip CP036470.zip file://./packages/CP036470.zip CP036470.vmexe CP036470.vmfile CP036470.xml README.txt changed Online ROM Flash Component for Linux - HP ProLiant DL360e Gen8/DL380e Gen8 (P73) Servers HP ProLiant DL360e Gen8/DL380e Gen8 (P73) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-p73-2018.05.21-1.1.i386.rpm firmware-system-p73-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-p73-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-p73-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-p73-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-p73-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-p73-2018.05.21-1.1/CP036446.xml ./usr/lib/i386-linux-gnu/firmware-system-p73-2018.05.21-1.1/CPQP7313.4B5 ./usr/lib/i386-linux-gnu/firmware-system-p73-2018.05.21-1.1/cpqsfp73.cfg ./usr/lib/i386-linux-gnu/firmware-system-p73-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036446.scexe changed Online ROM Flash Component for VMware ESXi- HP ProLiant DL580 Gen8 (P79) Servers HP ProLiant DL580 Gen8 (P79) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) This component requires that the following HPE drivers be loaded before the component can run.

1. The "HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) must be installed and running.

The minimum iLO version for ESXi 5.1, 5.5, 6.0, and ESXi 6.5 is 1.4.

2. The “Compaq ROM Utility Driver” (CRU) must be installed and running

The minimum CRU version for 5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.

SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the Post-Production SPP from www.hpe.com/servers/SPP/download
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Smart Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Smart Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Smart Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036498.zip CP036498.zip file://./packages/CP036498.zip CP036498.vmexe CP036498.vmfile CP036498.xml README.txt changed Online ROM Flash Component for VMware ESXi - HP ProLiant BL465c Gen8 (A26) Servers HP ProLiant BL465c Gen8 (A26) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Components are used, not the VMware Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the Post-Production SPP from www.hpe.com/servers/SPP/download
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP035456.zip CP035456.zip file://./packages/CP035456.zip CP035456.vmexe CP035456.vmfile CP035456.xml README.txt changed Online ROM Flash Component for Linux - HP ProLiant DL560 Gen8 (P77) Servers HP ProLiant DL560 Gen8 (P77) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-p77-2018.05.21-1.1.i386.rpm firmware-system-p77-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-p77-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-p77-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-p77-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-p77-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-p77-2018.05.21-1.1/CP036519.xml ./usr/lib/i386-linux-gnu/firmware-system-p77-2018.05.21-1.1/CPQP7713.4B5 ./usr/lib/i386-linux-gnu/firmware-system-p77-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036519.scexe changed Online ROM Flash Component for VMware ESXi - HP ProLiant BL420c Gen8 (I30) Servers HP ProLiant BL420c Gen8 (I30) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Smart Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Smart Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Smart Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036558.zip CP036558.zip file://./packages/CP036558.zip CP036558.vmexe CP036558.vmfile CP036558.xml README.txt changed Online ROM Flash Component for Linux - HP ProLiant ML10 v2 (J10) Servers HP ProLiant ML10 v2 (J10) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-j10-2018.05.21-1.1.i386.rpm firmware-system-j10-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-j10-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-j10-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-j10-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-j10-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-j10-2018.05.21-1.1/CP036438.xml ./usr/lib/i386-linux-gnu/firmware-system-j10-2018.05.21-1.1/CPQJ1013.4B5 ./usr/lib/i386-linux-gnu/firmware-system-j10-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036438.scexe changed Online ROM Flash Component for Linux - HP ProLiant DL580 Gen8 (P79) Servers HP ProLiant DL580 Gen8 (P79) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) The "HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) for Linux which is integrated into the standard Linux kernel.

]]> IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-p79-2.20_2018_05_21-1.1.i386.rpm firmware-system-p79-2.20_2018_05_21-1.1.i386.rpm file://./packages/firmware-system-p79-2.20_2018_05_21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-p79-2.20_2018_05_21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-p79-2.20_2018_05_21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-p79-2.20_2018_05_21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-p79-2.20_2018_05_21-1.1/CP036501.xml ./usr/lib/i386-linux-gnu/firmware-system-p79-2.20_2018_05_21-1.1/P79_2.20_05_21_2018.signed.flash ./usr/lib/i386-linux-gnu/firmware-system-p79-2.20_2018_05_21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036501.scexe changed Online ROM Flash Component for VMware ESXi - HP ProLiant SL210t Gen8 (P83) Servers HP ProLiant SL210t Gen8 (P83) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.

]]> IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Components are used, not the VMware Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the Post-Production SPP from www.hpe.com/servers/SPP/download
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036485.zip CP036485.zip file://./packages/CP036485.zip CP036485.vmexe CP036485.vmfile CP036485.xml README.txt changed Online ROM Flash Component for Linux - HP ProLiant ML310e Gen8 v2 (P78) Servers HP ProLiant ML310e Gen8 v2 (P78) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-p78-2018.05.21-1.1.i386.rpm firmware-system-p78-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-p78-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-p78-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-p78-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-p78-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-p78-2018.05.21-1.1/CP036491.xml ./usr/lib/i386-linux-gnu/firmware-system-p78-2018.05.21-1.1/CPQP7813.4B5 ./usr/lib/i386-linux-gnu/firmware-system-p78-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036491.scexe changed Online ROM Flash Component for Windows - HP ProLiant DL380p Gen8 (P70) Servers HP ProLiant DL380p Gen8 (P70) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036407.exe cp036407.exe file://./packages/cp036407.exe CPQP7013.4B5 SignedImageInstaller.dll cp036407.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for VMware ESXi - HP ProLiant SL4540 Gen8 (P74) Servers HP ProLiant SL4540 Gen8 (P74) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Smart Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Smart Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Smart Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036496.zip CP036496.zip file://./packages/CP036496.zip CP036496.vmexe CP036496.vmfile CP036496.xml README.txt changed Online ROM Flash Component for Linux - HP ProLiant MicroServer Gen8 (J06) Servers HP ProLiant MicroServer Gen8 (J06) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-j06-2018.05.21-1.1.i386.rpm firmware-system-j06-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-j06-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-j06-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-j06-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-j06-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-j06-2018.05.21-1.1/CP036420.xml ./usr/lib/i386-linux-gnu/firmware-system-j06-2018.05.21-1.1/CPQJ0613.4B5 ./usr/lib/i386-linux-gnu/firmware-system-j06-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036420.scexe changed Online ROM Flash Component for Linux - HP ProLiant ML10 (P88) Server HP ProLiant ML10 (P88) Server Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (x86) SUSE LINUX Enterprise Server 11 (AMD64/EM64T) SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) The "HPE ProLiant iLO 3/4 Channel Interface Driver” (CHIF) for Linux which is integrated into the standard Linux kernel.

]]> IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HPE ProLiant Agentless Management Service (AMS) and HPE SNMP Agents (SNMP Agents) are both running. HPE does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-p88-2018.05.21-1.1.i386.rpm firmware-system-p88-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-p88-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-p88-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-p88-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-p88-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-p88-2018.05.21-1.1/CP036443.xml ./usr/lib/i386-linux-gnu/firmware-system-p88-2018.05.21-1.1/CPQP8803.4B5 ./usr/lib/i386-linux-gnu/firmware-system-p88-2018.05.21-1.1/cpqsfp88.cfg ./usr/lib/i386-linux-gnu/firmware-system-p88-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036443.scexe changed Online ROM Flash Component for VMware ESXi - HP ProLiant DL160 Gen8 (J03) Servers HP ProLiant DL160 Gen8 (J03) Server Hewlett Packard Enterprise VMware vSphere 5.5 VMware vSphere 6.0 Server BIOS - System ROM English (US) IMPORTANT: This component requires that the CRU driver be loaded before the component can run.
The minimum CRU version for 5.0/5.1 is 5.0.3.9.
The minimum CRU version for 5.5 is 5.5.4.1.
The minimum CRU version for 6.0 is 6.0.8.
The minimum CRU version for 6.5 is 6.5.8.

Offline:

SPP Offline mode boots a special Linux OS environment, thus the Linux Components are used, not the VMware Components

Remote Online, if the component is supported by HP SUM but is not yet part of an SPP:

Download the Post-Production SPP from www.hpe.com/servers/SPP/download
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run HP SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For HP SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow HP Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: www.hpe.com/servers/spp

To use HP Insight Control for vCenter:

Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HP Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Component

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Component ( CPxxxxxx.zip) in a temporary directory
From the same directory, unzip the Component:
unzip CPxxxxxx.zip
To perform the standalone installation, execute the command:
CPxxxxxx.vmexe
Follow the directions given by the Component
Logout
Disable Tech Support Mode on the ESXi host
Reboot your system for the firmware update to take effect

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system CP036425.zip CP036425.zip file://./packages/CP036425.zip CP036425.vmexe CP036425.vmfile CP036425.xml README.txt changed Online ROM Flash Component for Linux - HP ProLiant BL660c Gen8 (I32) Servers HP ProLiant BL660c Gen8 Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HP ProLiant Agentless Management Service (hp-ams) and HP SNMP Agents (hp-snmp-agents) are both running. HP does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-i32-2018.05.21-1.1.i386.rpm firmware-system-i32-2018.05.21-1.1.i386.rpm file://./packages/firmware-system-i32-2018.05.21-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-i32-2018.05.21-1.1 ./usr/lib/i386-linux-gnu/firmware-system-i32-2018.05.21-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-i32-2018.05.21-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-i32-2018.05.21-1.1/CP036469.xml ./usr/lib/i386-linux-gnu/firmware-system-i32-2018.05.21-1.1/CPQI3213.4B5 ./usr/lib/i386-linux-gnu/firmware-system-i32-2018.05.21-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP036469.scexe changed Online ROM Flash Component for Windows - HP ProLiant BL460c/WS460c Gen8 (I31) Servers HP ProLiant BL460c/WS460c Gen8 (I31) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036463.exe cp036463.exe file://./packages/cp036463.exe CPQI3113.4B5 SignedImageInstaller.dll cp036463.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for Linux - HP ProLiant DL385p Gen8 (A28) Servers HP ProLiant DL385p Gen8 (A28) Servers Hewlett Packard Enterprise SUSE LINUX Enterprise Server 11 (AMD64/EM64T) Red Hat Enterprise Linux 6 Server (x86-64) Red Hat Enterprise Linux 7 Server SUSE Linux Enterprise Server 12 Server BIOS - System ROM English (US) IMPORTANT: This component will fail if it is unable to communicate with iLO. This can occur if HPE ProLiant Agentless Management Service (AMS) and HPE SNMP Agents (SNMP Agents) are both running. HPE does not recommend running AMS and the SNMP Agents at the same time. If an "iLO device not found" error occurs, stop AMS or the SNMP Agents, and run the flash component again.

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system firmware-system-a28-2018.03.14-1.1.i386.rpm firmware-system-a28-2018.03.14-1.1.i386.rpm file://./packages/firmware-system-a28-2018.03.14-1.1.i386.rpm ./usr/lib/i386-linux-gnu/firmware-system-a28-2018.03.14-1.1 ./usr/lib/i386-linux-gnu/firmware-system-a28-2018.03.14-1.1/.cpq_package.inc ./usr/lib/i386-linux-gnu/firmware-system-a28-2018.03.14-1.1/.hpsetup ./usr/lib/i386-linux-gnu/firmware-system-a28-2018.03.14-1.1/CP035533.xml ./usr/lib/i386-linux-gnu/firmware-system-a28-2018.03.14-1.1/CPQA2813.46E ./usr/lib/i386-linux-gnu/firmware-system-a28-2018.03.14-1.1/cpqsfa28.cfg ./usr/lib/i386-linux-gnu/firmware-system-a28-2018.03.14-1.1/hpsetup ./usr/lib/i386-linux-gnu/hp-scexe-compat ./usr/lib/i386-linux-gnu/hp-scexe-compat/CP035533.scexe changed Online ROM Flash Component for Windows - HP ProLiant DL385p Gen8 (A28) Servers HP ProLiant DL385p Gen8 (A28) Servers Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 R2 Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 R2 Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp035531.exe cp035531.exe file://./packages/cp035531.exe CPQA2813.46E SignedImageInstaller.dll cp035531.xml cpqsetup.exe cpqsysio.sys cpqsysio64.sys changed Online ROM Flash Component for Windows - HP ProLiant ML10 (P88) Server HP ProLiant ML10 (P88) Server Hewlett Packard Enterprise Microsoft Windows Server 2008 x64 Microsoft Windows Server 2008 W32 Microsoft Windows Server 2008 R2 Microsoft Windows Server 2012 Microsoft Windows Server 2012 Essentials Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2 Foundation Edition Microsoft Windows HPC Server 2008 R2 Microsoft Windows Server 2016 Server BIOS - System ROM English (US) To update firmware from Windows operating system on target server:

Supplemental updates for supported ProLiant servers and options can be done by using HP Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired smart components to be updated in the directory, \hp\swpackages on the USB key.

Update the firmware and software in the usual manner.

]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 firmware:system cp036441.exe cp036441.exe file://./packages/cp036441.exe CPQP8803.4B5 SysRomInstaller.dll cp036441.xml cpqasmi.sys cpqasmi64.sys cpqftbl.sys cpqftbl64.sys cpqpsmi.sys cpqpsmi64.sys cpqsetup.exe cpqsfp88.cfg cpqsysio.sys cpqsysio64.sys readme.txt